高通IPQ6018芯片加QCN5152方案的Wi-Fi6路由器6层PCB文件。

高通IPQ6000/IPQ6010/IPQ6018/IPQ6028系列，作为入门级Wi-Fi6的解决方案，具备高性价比优势，通过2x2+2x2双频并发技术再结合1024QAM高阶调制，单一终端峰值速率可被提升至近1.8Gbps。还支持IEEE802.11ax协议以及mesh组网协议；支持高通定制化的wifi-son组网协议等等。
此系列芯片CPU采用A53架构，主频最高可达1.8GHz，支持2x2+2x2双频并发，就是可以同时接入2.4GHz和5GHz两个频段，并且在每个频段上支持两路数据流进行传输（即2x2@2.4GHz+2x2@5GHz），系列芯片封装为18.1 mm × 18.1 mm 570-pin FCBGA。

Qualcomm IPQ6018 SPECifications:

SOC – Qualcomm Atheros IPQ6018 quad-core arm Cortex-A53 processor @ 1.8 GHz apparently part of Qualcomm Networking Pro 400 platform; 14nm FinFET process
system memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design
Storage – 256MB NAND Flash, 32MB NOR flash, SD card slot
Networking
Wired
5x Gigabit Ethernet ports
1x 2.5Gbps Ethernet port
Wireless
wifi
2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain
2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax WiFi 6, max 20dBm per chain
4x U.FL antenna connectors
2.4 GHz data rate up to 573 Mbps
5 GHz data rate up to 1201 Mbps
Bluetooth – Footprint for Bluetooth module

USB – 1x USB 3.0 Type-C port, optional USB 2.0 Type-A port
Expansion
1x M.2 (NGFF) “E Key” socket with MiniPCIe 3.0
FFC/FPC Connector for LED
Mini USB 2.0 port for Bluetooth debugging
Debugging – 20-pin JTAG header for loader and firmware, 4-pin header for serial console.
Misc – Reset button, switch for boot config, switch for auth enable
power Supply – 12VDC via DC jack input
Dimensions – 218 x 150 x 16.5 mm (without heatsink)

BOM清单